Why You May Need To Convert Your Pressure Washer Into A Sewer Jetter?
This post shall take you through the steps of how to convert a pressure washer into to a sewer jetter using the same machine to carry out many important cleaning tasks. Many times you may find your piping systems flowing sluggishly or completely clogged which requires your attention. Here you are without a sewer jetter machine, don’t worry if you already have a pressure washer. You can get the work done by converting your pressure washer into a sewer jetter. You need not spend money buying a sewer jetter.
We have some great but simple tips on how to convert a pressure washer into a sewer jetter. Before we take you further in this journey, let’s get to know what a sewer jetter is in case you don’t know. A sewer jetter is a type of machine usually deployed to blast clogs and debris along with your piping system down the septic tank. It deploys high-pressure jets of water that push away clogs your sewage pipes.
What You Need For The Conversion
Your conventional pressure washer can be adopted to carry out this task with a little addition of a sewer jetter kit. To achieve this conversion, you need the conversion kit pack which contains:
Ball valves, Jetter hose, Nozzles, Jumper hose, and hose reel. With these components in your possession, you are good to go.
Step-By-Steps Guide On How To Convert Your Pressure Washer Into A Sewer Jetter
- The first step is to connect your pressure washer hose to the main pressure. Make sure the water source has high pressure. This is necessary to produce enough pressure to blast the clogs and debris from the piping system and push them down the drain.
- The next step is disconnecting and removing the spray gun from your pressure washer hose and replacing it with the ball valve from the conversion kit.
- Connect one end of the ball valve into the jumper hose. Make sure you correctly identify the IN and OUT ends of the ball valve.
- Attach one end of the jetter hose to the other end of the jumper hose.
- Keep the jetter hose wrapped around the hose reel for easy maneuvering.
- Proceed to fix the correct nozzle on the other end of the jetter hose. Ensure that each connection is correct and properly done to avoid loss of pressure and water splashing.
- The next step is to identify the entry point into the pipe you want to clean. Once you have decided on this, insert the jetter hose into the pipe at that point. NOTE: Remember to still keep your pressure washer at OFF point up till this point.
- When you have safely tucked the jetter hose into the pipe you want to clean, you can turn on your pressure washer to rid your piping system of clogs and debris.
- Keep pushing the jetter hose forth and back to achieve a thorough cleaning. Continue until you have achieved a free flow of water in the piping system.
- You have to put off your pressure washer when you are done with the cleaning. Don’t remove the jetter hose from the pipe until you have switched off the pressure washer to avoid high-pressure jets (which can be up to 4,000 psi) of water from hitting you.
You can go through a reverse process to revert your temporary sewer jetter back to its pressure washer status. This is necessary because you need your machine more often for pressure cleaning than as sewer jetter cleaning which comes up once in a while. Clean up your machine and store it in the appropriate storage place.
You see how simple it is to convert and revert your pressure cleaner to avoid unnecessary investment on an additional machine that you rarely have a need for.
CONCLUSION
Now that you have a clear understanding of how to convert your pressure washer into a sewer jetter,you can begin to enjoy the service of your pressure washer more than you initially envisage. You can multitask your pressure washer and save yourself of clog piping system problems and unnecessary investment. This form of Do It Yourself (DIY) technique saves you money and puts you in total control of all your operations around your home. You will be free from those exorbitant professional costs.
